WECO Reverse Osmosis Tank Air Pressure Gauge with Bleeder Valve (5-60 PSI)
SKU
APG-60
1
Review
Add Your Review
Related Products
- Standard undersink RO tanks must maintain 7-10 PSI air precharge for normal operation. Lower air pressure will result in low water flow to the drinking water faucet.
- Make sure the valve is free of dirt and debris.
- Use the air pressure gauge dial to measure the tank air pre-charge when it's empty (no water inside).
- Press gauge firmly onto valve stem and read PSI on indicator.
- Reset dial by depressing pressure release button on side of unit.
- Use a bicycle pump to inflate the RO tank to the proper pressure.
- 3.24 in. x 1.66 in. x 0.98 in.
- Standard undersink RO tanks must maintain 7-10 PSI air precharge for normal operation. Lower air pressure will result in low water flow to the drinking water faucet.
- Make sure the valve is free of dirt and debris.
- Use the air pressure gauge dial to measure the tank air pre-charge when it's empty (no water inside).
- Press gauge firmly onto valve stem and read PSI on indicator.
- Reset dial by depressing pressure release button on side of unit.
- Use a bicycle pump to inflate the RO tank to the proper pressure.
- 3.24 in. x 1.66 in. x 0.98 in.
| UPC | 749460855538 |
|---|
You're reviewing:
No question found!